6-16
Cisco Wireless LAN Controller Configuration Guide
OL-1926-06OL-9141-03
Chapter 6 Configuring WLANsWireless Device Access
Configuring WLANs
Figure 6-4
WLANs > Edit Page (bottom)
Step 6
Click
Save Configuration
.
Using the CLI to Configure VPN Passthrough
Enter this command to enable VPN Passthrough for a WLAN using the controller CLI.
•
config wlan security passthru
{
enable
|
disable
}
wlan-id
gateway
–
For
gateway
, enter the IP address of the router that is terminating the VPN tunnel.
–
Enter
show wlan
to verify that the passthrough is enabled.
Web-Based Authentication
Web authentication is simple to set up and use and can be used with SSL to improve the overall security
of the WLAN. The use of Web authentication requires Microsoft Internet Explorer with Active Scripts
enabled. Enter these commands to enable web authentication for a WLAN:
•
config wlan security web
{
enable
|
disable
}
wlan-id
•
Enter
show wlan
to verify that web authentication is enabled.
Local Netuser
Controllers have built-in network client authentication capability, similar to that provided by a RADIUS
authentication server. Enter these commands to create a list of usernames and passwords allowed access
to the WLAN:
•
Enter
show netuser
to display client names assigned to WLANs.
•
Enter
config netuser add
username
password
wlan-id
to add a user to a WLAN.
