Cirris Signature 1000HN, User Manual

Page: 52 / 86

Section 11: Rework and Guided Assembly / Removing shorts between nets
1000HN User’s Guide / page 52
analyzer may prompt
Intermittents
as you rework the connection. To clear this
prompt, press the
Memory
button on the back of the analyzer.
Removing shorts
between nets
If the analyzer detects short circuits in the cable or harness you are testing, it will tell
you where to make cuts to correct the shorts. This will happen if two nets should
become shorted. To correct a detected short, do these things:
1. The analyzer will prompt Cut JX-XX From JX-XX , where X indicates the
adapter positions and pin number.
2. Locate the short between the nets, and remove it.
Please see next page...
G O O D C A B L E
B R E A K J X -X X
C a b le h a s b e e n c o rre cte d
Yo u ’ve cre a te d a n o th e r s h o rt.
G o b a ck a n d try a g a in
C U T JX -X X
F R O M JX -X X