Cirris Signature 1000HN, User Manual

Page: 35 / 86

1000HN User’s Guide / page 35
Overview
If you have a printer connected to your 1000HN, you can print a directory that shows
all the Sample Cables stored in the analyzer’s memory. The directory will show the
memory location number, and the signature of the Sample Cable stored in each mem-
ory location.
Important Note!
: For photographic clarity, we’ve removed the printer
cable in the views shown here. For your printer to work, it must be connected to the
analyzer.
Print out a directory To print out a directory of the Sample Cables stored in the analyzer’s memory, do
these things:
1. Make sure the printer is properly connected to the analyzer, and is turned on.
2. Press and hold in the
Memory
button as you turn on the analyzer. Continue to
hold in the
Memory
button as you do the next step.
3. As you continue to hold in the
Memory
button, press
Display/Print
once. This
causes the display to prompt
Press Function To Print Dir
.
READY TO ACCESS
MEMORY LOCATION
...as you turn the analyzer on
Press and hold this button...
( Note
: Printer cable is not shown
)
READY TO ACCESS
MEMORY LOCATION
...as you press here
Continue to hold this button in...
(
Note
: Printer cable is not shown)
Section 8: Print
a Directory of
Cables Stored
in Memory