Cirris Signature 1000HN, User Manual

Page: 18 / 86

Section 2: Check the Option Settings / What to do if you go past the value you want
1000HN User’s Guide / page 18
4. Continue stepping through the options by pressing
Display/Print
, changing the
settings as necessary by pressing
Function
, until all the options are set as shown
in this table: When you are done,
Ready to Learn
will appear on the display.
What to do if you go
past the value you
want
If you want to go backward through either the options or settings, press in and hold
the
Memory
button on the back of the analyzer, while pressing
Display/Print
or
Function
.
Note
: All options or settings will roll over to the beginning when you are
going forward or backward.
.
Your option settings
are saved
When you set the value you want, it is saved once it is displayed on the screen.Turn
off the analyzer, the analyzer will use those settings when you power it up again.
Factory Default Option Settings
Option Setting
Create Test From SAMPLE CABLE
Connection Resistance AUTO
Hipot Voltage 300 V
Insulation Resistance 10 M
Ω
Hipot Duration 100mS
Apply Hipot to ALL ADAPTER PINS
Auto Hipot OFF
Error Tones are LOW
Sorted Wire List is OFF
Count All Cables is OFF
Auto Print is OFF
Memory button