Cirris Signature 1000HN, User Manual

Page: 30 / 86

Section 5: Test Your First Cable / Print or transcribe an error list
1000HN User’s Guide / page 30
Passed Hipot Test
If the hipot test is successful, the analyzer briefly prompts
Passed Hipot Test
, then
cycles to a continuous resistance test and prompts
Good R<.X
Ω
. The analyzer emits
a steady clicking sound after each newly-completed continuity/conductance test. To
repeat the hipot test, press
Function
again. The conductance test always follows a
successful hipot test, and continues until you remove the cable.
Print or transcribe an
error list
If the analyzer detects errors, it can prompt where the error is in a cable. To do this,
press
Display/Print
while the cable is still connected to the analyzer. If you have a
printer connected to your analyzer, it will automatically print out an error list. If you
don’t have a printer, keep pressing
Display/Print
to step through the errors as you
transcribe them to a cable documentation form (see page 75).
PASSED HIPOT TEST
SIG:BBF038-6J0A0
GOOD R<.X
Ω