Cirris Signature 1000HN, User Manual

Page: 26 / 86

Section 4: Learn a Sample Cable, Store it in Memory / What to do if you see an error message
1000HN User’s Guide / page 26
• If the cable is not built correctly, use another Sample Cable that does not
contain the errors, and repeat the learning process.
Note
: If you discon-
nect the cable with the error, or if you press the
Memory
button, the
analyzer will enter the test mode.
2. If the error message is
Insulation Resis < Auto .XXXX
, check to see if the
Connection Resistance is set to
AUTO
, and the Auto resistance is higher than the
Insulation Resistance setting.
• Change the Insulation Resistance setting to be equal to or higher than
the
AUTO
Connection Resistance setting prompted in the display. See
1000HN for details on how to change the setting.