Cirris Signature 1000HN, User Manual

Page: 41 / 86

Section 9: Cable Documentation and Signatures / How connector adapters are placed on the analyzer
1000HN User’s Guide / page 41
How connector
adapters are placed
on the analyzer
The 1000HN analyzer itself has four connector adapter positions on its scanner
assembly, marked J1 through J4. Each position has 32 points, for a total of 128 avail-
able points.
How connector
adapters are placed
on the expansion box
The expansion box has four connector adapter positions on its scanner assembly.
These positions are not marked. They each have a white square on which you may
write in the adapter position number. The analyzer recognizes the positions for the
expansion box as J5 through J8 (256 available test points).
Order of adapter
positions
In your cable documentation, connector adapter positions appear in sequential order
beginning with J1. However, if you install either a double-high or a quad-high con-
nector adapter (see page 9), some adapter positions are eliminated. In this photo, posi-
tion J2 is eliminated because a double-high adapter has been installed in positions J1
and J2. A single-high adapter has been installed in position J4. In this example, the
next position sensed by the analyzer during testing will be J4. The cable documenta-
tion will show interconnections for J1 and J4, but not J2 or J3.
J1
J2
J3
J4
E xp a n sio n bo x w ith w h ite sq u are s at
a ll fou r a d a pte r p ositio n s
Squares
1000HN with 1 expansion box
installed. Eight “J” positions
(256 test points) are available.
Double-high adapter in J1-J2, single-high adapter in J4