Circutor DHB-302, Instruction Manual

Page: 42 / 70

4�6�8�2� pASSWORD
This screen is used to enter a password to access the unit's setup menus.
The screen flashes between the symbol and the configured value (
figure 50
)
figure 50:password screens�
To edit the parameter, press the button.
To modify the value of the selected digit, press the button repeatedly.
To jump to the next digit, press the button
Once at the desired value, validate by pressing the button. The unit will go back to the
screen shown in
figure 50
.
To move to the next parameter on the menu, press the button.
Range:
0 ... 60000.
Default value: 0
Note:
If the programmed value is
0
, the menus will not be password-protected.
4�6�8�3� CURReNT TIMe
Screen to set the unit's clock to the current time.
The screen flashes between the symbol and the configured value (
figure 37
).
figure 51: Current time adjustment screens�
To edit the parameter, press the button.
To modify the value of the selected digit, press the button repeatedly.
To jump to the next digit, press the button
Once at the desired value, validate by pressing the button. The unit will go back to the
screen shown in
figure 51�
To move to the next parameter on the menu, press the button.
Range: 0.00 ... 23.59.
42
DHB-302 DHB-324
Instruction Manual