Circutor DHB-302, Instruction Manual

Page: 34 / 70

4�6�3�7� LeDs
These screens are used to activate the interlocking of the display LEDs that indicate whether
an alarm has been activated or not.
The screen flashes between the symbol and the configured value (
figure 37
)
figure 37: LED configuration screen.
To edit the parameter, press the button.
The options are:
When the alarm condition is no longer met, the corresponding
LED will switch off.
When the alarm condition is no longer met, the corresponding LED
stays on.
You must press the button combination for 3 seconds to
switch it off.
To move from one option to another, press the button repeatedly.
When you see the option you want, validate by pressing the
button.
The unit goes back to the screen shown in
figure 37
.
To move to the next parameter on the menu, press the button.
Default value: Alarm LEDs not interlocked (OFF).
4�6�3�8� eXITINg THe MeNU�
At the end of the menu the screen shown in
figure 38
appears.
Press the button to go back to the main screen of the alarms menu
figure 31
.
figure 38:end of menu screen�
34
DHB-302 DHB-324
Instruction Manual