Circutor DHB-302, Instruction Manual

Page: 37 / 70

To jump to the next digit, press the button
Once at the desired value, validate by pressing the button.
You can now select the position of the decimal point, which will be flashing.
To select the position of the decimal point, press the
button.
Validate by pressing the button. The unit goes to unit configuration.
To select the unit, press the button repeatedly.
The unit selected is displayed in red.
Once at the desired unit, validate by pressing the
button. The unit will go back to the screen
shown in
figure 41
.
To move to the next parameter on the menu, press the button.
Range : -19999 M ... 99999 M.
Default value : 0.0000
4�6�7�3� ANALOgUe OUTpUT: fULL-SCALe VALUe ( DHB-324 model) �
This screen is used to configure the display value you wish to have at the end of the analogue
output ( 10 V or 20 mA , depending on the type of output selected).
The screen flashes between the symbol and the configured value (
figure 42
).
figure 42: Analogue output configuration screen: full-scale value.
To edit the parameter, press the button.
To modify the value of the selected digit, press the button repeatedly.
To jump to the next digit, press the button
Once at the desired value, validate by pressing the button.
You can now select the position of the decimal point, which will be flashing.
To select the position of the decimal point, press the button.
Validate by pressing the button. The unit goes to unit configuration.
To select the unit, press the button repeatedly.
The unit selected is displayed in red.
Once at the desired unit, validate by pressing the
button. The unit goes back to the screen
shown in
figure 42
.
To move to the next parameter on the menu, press the button.
Range:
-19999 M ... 99999 M.
Default value: 5.0000
37
Instruction Manual
DHB-302 DHB-324