Circutor DHB-302, Instruction Manual

Page: 36 / 70

Apparent power
Power factor
(cos φ)
tg φ φ
Frequency
Active energy
Generated
Active energy
Consumed
Reactive energy
Generated
Reactive energy
Consumed
Maximum demand for
active power.
Average voltage
(10 minutes)
Average frequency
(10 seconds)
To move from one option to another, press the button repeatedly.
When you see the option you want, validate by pressing the button.
The unit goes back to the screen shown in
figure 40
.
To move to the next parameter on the menu, press the button.
Default value:
RMS current (
I
).
4�6�7�2� ANALOgUe OUTpUT: ZeRO VALUe ( DHB-324 model)
This screen is used to configure the display value you wish to have at the beginning of the an-
alogue output ( 0 V , 0 mA or 4 mA , depending on the type of output selected).
The screen flashes between the symbol and the configured value (
figure 41
).
figure 41: Analogue output configuration screen: zero value.
To edit the parameter, press the button.
To modify the value of the selected digit, press the button repeatedly.
36
DHB-302 DHB-324
Instruction Manual