Circutor DHB-302, Instruction Manual

Page: 22 / 70

To modify the value of the selected digit, press the button repeatedly.
To jump to the next digit, press the button.
Once at the desired value, validate by pressing the button.
To move to the next parameter on the menu, press the button.
When the button is pressed, the unit goes to the main screen of the parameters menu
(
figure 12
).
Range: 1 ... 4000.0
Default value:
1.0
4�6�1�6� CURReNT RATIO
This screen is used to configure the current ratio, which is the ratio between the primary and
secondary current.
Example: Primary current = 2500 A
Secondary current = 5 A
The current ratio: 2500 A / 5 A = 500
The screen flashes between the symbol and the configured value.
(figure 18
).
figure 18: Current ratio screen�
To edit the parameter, press the button.
To modify the value of the selected digit, press the button repeatedly.
To jump to the next digit, press the button.
Once at the desired value, validate by pressing the button.
To move to the next parameter on the menu, press the button.
When the button is pressed, the unit goes to the main screen of the parameters menu
(
figure 12
).
Range: 1 ... 10000
Default value: 1
22
DHB-302 DHB-324
Instruction Manual