Circutor DHB-302, Instruction Manual

Page: 31 / 70

Reactive energy
Consumed
Maximum demand for
active power
Average voltage
(10 minutes)
Average frequency
(10 seconds)
To move from one option to another, press the button repeatedly.
When you see the option you want, validate by pressing the button.
The unit goes back to the screen shown in
figure 32
.
To move to the next parameter on the menu, press the button.
Default value: Active power ( p ).
4�6�3�3� ALARM LOW VALUe
This screen is used to configure the low value of the alarm, prL .
The screen flashes between the symbol and the configured value (
figure 33
).
figure 33:Alarm low value screen�
To edit the parameter, press the button.
To modify the value of the selected digit, press the button repeatedly.
To jump to the next digit, press the button
Once at the desired value, validate by pressing the button.
You can now select the position of the decimal point, which will be flashing.
To select the position of the decimal point, press the button.
Validate by pressing the button. The unit goes to unit configuration.
To select the unit, press the button repeatedly.
The unit selected is displayed in red.
Once at the desired unit, validate by pressing the button.
The unit goes back to the screen shown in
figure 33 .
To move to the next parameter on the menu, press the button.
31
Instruction Manual
DHB-302 DHB-324