If you press the
key after changing the last digit, it will jump back to the first digit so you can
modify the previously programmed values again.
To validate the data, press
for 3 seconds and the
prog
icon will disappear from the display.
Press key
to access the next programming step.
Programming the contact status
The status of relay contacts is selected on this screen.
Press key
for 3 seconds to edit the selection. The
prog
icon will
be displayed on the bottom of the screen.
Press key
to browse the two options:
Normally open contact.
Normally closed contact.
To validate the data, press
for 3 seconds and the
prog
icon will disappear from the display.
Press key
to access the next programming step
4�9�24� PROGRAMMING ALARM 2 (RELAY 2)
Note:
Configuration parameters not available for the
CVM-C10-FLEX
model
.
The values for alarm relay 2 are programmed on this screen.
They are programmed as in the case of alarm relay 1, see
Programming alarm 1 (Relay 1)”
4�9�25� PROGRAMMING ALARM 3 (DIGITAL OUTPUT T1)
Note:
Configuration parameters not available for the
CVM-C10-FLEX, CVM-C10-ITF-IN and CVM-C10-
MC-IN
models.
All values for digital output T1 are programmed on this screen.
The variable code is selected on this screen, depending on
and
which will control digital output T1.
Press key
for 3 seconds to edit the code selection. The
prog
icon
will be displayed on the bottom of the screen.
63
Instruction Manual
CVM-C10
