the display screens are those that were stored in previous programming settings of the
device. (In the case of new devices, these will be the same as those of the
analyzer
profile)
, the display screens are selected.
To validate the data, press
for 3 seconds and the
prog
icon will disappear from the display.
Press key
to access the next programming step
Selecting the screens
The following screen will be displayed if you have selected
:
This screen displays the first screen of the
analyzer
profile,
Phase-
phase Voltage
and the
user
profile viewing option can be selected.
Press key
for 3 seconds to edit the selection. The
prog
icon will
be displayed on the bottom of the screen.
Press key
to browse the two options:
, to display the screen in the user menu.
, to stop displaying the screen.
To validate the data, press
for 3 seconds and the
prog
icon will disappear from the display.
Press key
to access the next programming step
This programming step is repeated for each one of the 18 screens of the device.
4�9�13� BACKLIGHT, TURNING ON THE BACKLIT DISPLAY
The time that the Backlight will stay lit (in seconds) is programmed on
this screen after the last keystroke on the unit .
Press key
for 3 seconds to edit the backlight value. The
prog
icon
will be displayed on the bottom of the screen.
To enter or modify the value, press the
key repeatedly, increasing the value of the flashing digit.
When the desired value is shown on the screen, move onto the next digit by pressing the key
to
modify the other values.
If you press the
key after changing the last digit, it will jump back to the first digit so you can
modify the previously programmed values again.
53
Instruction Manual
CVM-C10
