Programming kilowatts per pulse
Press key
for 3 seconds to edit the kilowatts per pulse selection.
The
prog
icon will be displayed on the bottom of the screen.
To enter or modify the value, press the
key repeatedly, increasing
the value of the flashing digit.
When the desired value is shown on the screen, move onto the next digit by pressing the key
to
modify the other values.
If you press the
key after changing the last digit, it will jump back to the first digit so you can
modify the previously programmed values again.
To validate the data, press
for 3 seconds and the
prog
icon will disappear from the display.
Press key
to access the next programming step.
The programmed value will be deleted if the entered value is higher than the maximum programming
value.
Maximum programming value:
999.999 KWh
Minimum programming value:
000.001 KWh
Example:
To program 500 Wh per pulse:
000.500
To program 1.5 kWh per pulse:
001.500
Programming the pulse width
The width of the pulse is selected on this screen in ms.
Press key
for 3 seconds to edit the pulse width selection. The
prog
icon will be displayed on the bottom of the screen.
To enter or modify the value, press the
key repeatedly, increasing
the value of the flashing digit.
When the desired value is shown on the screen, move onto the next digit by pressing the key
to
modify the other values.
If you press the
key after changing the last digit, it will jump back to the first digit so you can
modify the previously programmed values again.
To validate the data, press
for 3 seconds and the
prog
icon will disappear from the display.
Press key
to access the next programming step.
The programmed value will be deleted if the entered value is higher than the maximum programming
value.
65
Instruction Manual
CVM-C10
