-- Supply network analyzer CVM-144 (HAR) ----- User's manual --- Page No. 38
c.- Scale offset
:
Value of the parameter that we assign as the zero of the scale.
dA 1
OUTPUT D/A Nr.1
Zero
zero of the scale:
x.xxx
(
allows choosing the zero of the scale
(four digits with floating decimal point)
-
"
max
" key: it allows modifying the value of the blinking value.
-
Every time it is pressed the number is increased.
-
"
min
" key: it allows validating the blinking value and go to the next digit.
NOTE
: When you arrive at the last digit, you can move the position of the
decimal point with the "
max
" key.
- "
display
": to validate the selected option and pass to the next setup screen.
d.- Full scale:
Value of the parameter to which we assign the 20 mA.
dA 1
OUTPUT D/A Nr.1
F.ESC
Full scale:
x.xxx
(
allows choosing the full scale (20 mA)
(four digits with floating decimal point)
Proceed as in the previous section.
