-- Supply network analyzer CVM-144 (HAR) ----- User's manual --- Page No. 32
a.- If an ENERGY parameter is chosen: kWh (31), kvarhL (32) or kvarhC(33)
OUT 1
RELAY 1
PULS
xxxx
(
kW / pulse (1)
(1) Value of energy in kW : four digits with floating decimal point
Set-up procedure:
-
"
max
" key: to modify the value of the blinking value. Every time it is pressed the
value is increased.
-
"
min
" key: to validate the blinking value and go to the next digit.
NOTE
: When the last digit is reached, the position of the decimal can be move point
with the "
max
" key.
Example for setting a 500 W / 1 pulse:
Firstly we enter the value, 0500, and following we place the decimal point at
the right position with the "
max
" key
Î
0.500 kW.
