-- Supply network analyzer CVM-144 (HAR) ----- User's manual --- Page No. 27
6.7.- Initial screen setting
This option allows choice among
fixed or rotary screen:
a)
Fixed screen
(choice is switch just pressing
): choice the initial screen to be
shown when the CVM-144 is powered (or when the CVM-144 is reset).
b)
Rotary screens
: all screens are successively shown at intervals of 5 s.
This option is noticed by means of some leds:
SET
dEF
PAGE
-
The key "
max
": permits to modify the selected page. The led of the selected
option will be on. Whether rotary screens option is selected, then all leds will be
on.
-
Press "
" to validate the choice.
6.8.- Setting of the display shutdown time
Setting of the period of time to go by, from the moment that the CVM keyboard
is not touched anymore, before the CVM display is automatically shut down (low
consumption mode):
dISP
OFF
05
→
Time to shutdown (Minutes)
When the display is shut down, a point at the bottom left corner of the CVM
will keep blinking. The display will be automatically turned on when any CVM key is
pressed.
- "
max
" key: to modify the value of the blinking value.
- "
min
" key: to validate the blinking value and go to the next digit.
