-- Supply network analyzer CVM-144 (HAR) ----- User's manual --- Page No. 40
6.12.2.- Additional screens with 4 - 20 mA inputs
The
4-20 mA
analog inputs (which can also be optionally 0-10 V type) can be
set to obtain the processed signal either by display or through communications. To
complete the analog inputs management, the user must
program the scale values
(offset and full-scale value).
On the CVM screen following messages appear at this SET-UP point
(provided the right module is connected to the equipment):
b.- Election of 0 - 20 mA or 4 - 20 mA :
In 1
INPUT A/D Nr.1
Scal
Scale :
4 - 20
(
allows choosing a 0 - 20 mA
or 4 - 20 input ("
max
" or "
min
" key)
* This choice is disable in case of 0-10 V type input card
- "
display
": to validate the selected option and pass to the next setup screen.
