- 11
-
Controls and Their Functions
12)
Air Cleanout Valve (optional):
Connect air line or solvent line to this connector to
flush out system. This valve should remain closed at all times other than cleanout.
13)
Temperature Control Box:
This control allows the operator to set the desired oil and
material temperatures. The setting will be maintained automatically.
14)
Wand Holder:
On models with the electrically heated hose, the wand is placed into
this holder.
15)
Cabinet Temperature Gauge:
Indicates the temperature inside the cabinet. Do not
exceed 320º F. If conditions permit exceeding this temperature, open cabinet door.
16)
Thermal Regulating Gate:
Lift lever to open gate which will direct hot air to cabinet
to heat pump and plumbing.
17)
PSI Gauge:
This gauge will tell you the amount of pressure in the hydraulic system.
18)
Ignition Access Door:
On Diesel models, lift this door for access to ignition key.
Diagram 1
Summary of Contents for MAGMA 110
