Ciara Kronos 600 X79-KA SERIES, User Manual

Page: 6 / 228

CIARA Kronos 600 workstation X79-KA-XXXXX-XX-XXX
- 6 -
1.2 Choosing a site for the system
All CIARA computers operate reliably in a typical office or home environment. Choose a location that is readily accessible and meets
the following requirements:

The socket-outlet shall be installed near the equipment and shall be easily accessible

Is clean and dust free

Is well-ventilated and lighted and away from sources of heat

Is isolated from strong electromagnetic fields produced by electrical devices
(I.e. air conditioners, large fans, large electric motors, radio and TV transmitters)

Has an appropriate table or desk that will allow you to work without physical discomfort and strain.
INPUT 120Vac, 60Hz, 10A
A few general precautions should always be observed:

Never connect any peripheral such as a monitor to the system unit if the power is turned "ON". Always shut down the
system first.

Never remove any internal adapter cards in the system unit if the power is turned "ON" as this will ruin the Card/Computer
and Void the Warranty.

Never install and connect more peripherals than available power supply plugs to avoid exceeding the maximum power of
the system.
NOTE The Enterprise model comes either with or without a power supply On/OFF switch. For those systems that do not have a
switch, make sure to shut down the system through Windows before proceeding to any repair or replacement work inside the system.