Guangdong Chuangda Automatic Equipment Co.,Ltd.
9
/
63
Add: D11, New Lighting Source Industrial Basis, Nanhai District, Foshan City, Guangdong Province
Tel: +86- 0757-82629566 82629546 82326616 Fax: +86- 0757-82622156
Click
【
Memory function
】
key to enter the following interface
(Fig. 3)
4-1 Jacquard Parameter Setting
"Preliminary Instructions" are used to input various parameters of the jacquard machine. This function
involves wider aspects and will be described in detail below.
Note: Mechanical preliminary instructions (for example: the name of the machine, the total needles,
number of units, etc.) have been previously entered into the computer by the manufacturer, if the user
needs to change them, contact the manufacturer.
4-1-1 Preliminary Instructions
(Fig. 4)
Each page in this command can be changed to other pages by pressing
【
Previous page
】【
Next page
】
. However, no
matter at what page, you can directly exit the preliminary instruction revision mode by pressing the [End] key. When
operating, you can use
【
↑
】【
↓
】【
←
】【
→
】
keys to move the cursor, use
【
+
】【
-
】
key to modify, or directly
use the numeric keypad to enter.
Function
6. Electrical parameter setting
1. Date
2. Plate making
3. Language/Mode
4. Preliminary Instructions
5. Indicating brightness
End/ESC
Machine type
Needles
Number of units
Number of actuator
s
Number of used units
Number of needle selection segments
Next page
System/MENU
Blank
End/ESC
