Guangdong Chuangda Automatic Equipment Co.,Ltd.
7
/
63
Add: D11, New Lighting Source Industrial Basis, Nanhai District, Foshan City, Guangdong Province
Tel: +86- 0757-82629566 82629546 82326616 Fax: +86- 0757-82622156
3. Main Start Menu
Knitting Screen Display
When you turn on the power, the main machine starts to work and the
actuator
gradually warms up.
At this time, following menu will appear on the screen, it displays such information as machine type,
needles, number of
actuator
units, number of
actuator
segments, proximity switch (photoelectric
switch), needle cylinder and synchronizer rotating direction and rotating speed, and shift etc. The
longitudinal boxes at the bottom show the operating state of the electrical part.
On the bottom of the
box shows the electrical part of the running condition
(Note: This menu is a standby menu, and the computer has not entered the Jacquard mode)
(Fig. 1)
If the main machine cannot communicate with the electrical controller, it pos up the following warning box:
(Fig. 2)
At this point the machine will not operate. Please check the cable connecting the main machine and the power
OFF
AB BC
Needles
2016
Number of units:
48
Number of
actuators
:
48
Needle selection segment:
8
Needle cylinder:
Right
Synchronizer:
Left
Speed (RPM):
00.0
Shift:
1. Pattern type
2. Check
3. Count
4. Memory function
5. Reset
6. Next page tips
OFF
AB BC
Needles:
2016
Number of units:
48
Number of actuator:
48
Needle selection segment:
8
Needle cylinder:
Right
Synchronizer:
Left
Speed (RPM):
00.0
Shift:
1. Pattern type
2. Check
3. Count
4. Memory function
5. Reset
6. Next page tips
The control panel is not started!
Minimize
The control panel is not started!
