Guangdong Chuangda Automatic Equipment Co.,Ltd.
12
/
63
Add: D11, New Lighting Source Industrial Basis, Nanhai District, Foshan City, Guangdong Province
Tel: +86- 0757-82629566 82629546 82326616 Fax: +86- 0757-82622156
(Fig. 7)
The screen displays the ideal position of the actuator cutter head after preheating and reset. At the center of the
screen are the colors of the codes at the right end, an inverted numbers indicates the status of actuator.
Repeat
– You can use this key to enter the same information, the operation method is shown in Figure 6.
You can use
【
↑
】【
↓
】
keys to select a certain actuator number, use
【
+
】【
-
】
keys to modify the pattern .
After selecting the pattern, you can select "Welt", "Knit", "1X1A", "1X1B" and "Custom".
When you select "Custom”, the displayed menu will change as shown below:
(Fig. 8)
In this interface, press
【
↑
】
【
↓
】
keys to move the "←" arrow , use
【
+
】
【
-
】
keys to change the state. After entering
a custom pattern, press the
【
Set
】
key to save and return to the menu in Figure 7.
Note
: Following are the differences between two- function
position
and three- function
position
actuator.
● Two- function
position
actuator
ACT 1 = the first set of actuator
ACT 2 = the second set of actuator
Actuator
Pattern setting
：
Knit
：
Welt
Welt
Knit
1X1A
Knit
Welt
Next page
Previous page
Repeat/ MENU
End/ESC
Actuator
Pattern setting
：
Knit
：
Welt
Next page
Previous page
Set/ENT
Return
Custom
