Guangdong Chuangda Automatic Equipment Co.,Ltd.
42
/
63
Add: D11, New Lighting Source Industrial Basis, Nanhai District, Foshan City, Guangdong Province
Tel: +86- 0757-82629566 82629546 82326616 Fax: +86- 0757-82622156
(Fig. 61)
8. Reset
【
Reset
】
: This key is used to bring all the actuators into controller setting mode when the power is turned
on. When the pattern is cleared or the machine parameters are reset, this key will also be used. After
pressing the
【
Reset
】
key, the color of the key will become reverse 2 minutes later, the computer
begins to run this command at this time.
Reset
After pressing the
【
Reset
】
key, the reset mode can be canceled by pressing the
【
Reset
】
key once again.
Reset
9. Color Change Command
In Fig. 1, press the "Next Page Tip" and then press
【
color change
】
key to enter the following interface:
(Fig. 62)
Count Setting
Set number
Cumulative
number
Again
Cancel
Start
Stop
End/ESC
Confirm to clear the count number of shift A?
Prompt
Confirm
Cancel
Color Change Command
Number of colors used =
0 Number of colors used
9 Run
End/ESC
