Guangdong Chuangda Automatic Equipment Co.,Ltd.
10
/
63
Add: D11, New Lighting Source Industrial Basis, Nanhai District, Foshan City, Guangdong Province
Tel: +86- 0757-82629566 82629546 82326616 Fax: +86- 0757-82622156
Note: When wrong data are input, it is unable to quit [preliminary instructions].
①
Machine Name: Enter the machine name, using up to 12 characters, and change the text using
【
+
】【
-
】
keys.
②
The total needles: Enter the total needles of the machine.
③
Number of units: Enter the number of yarn feeder units of the machine.
④
Number of actuators: Enter the number of actuators used by the machine. (Note: If it is a 3-function
position
mode,
the number of actuators is two times of the number of units)
2- function
position
mode = 1 function
position
connecting 1 actuator
For example: 48-unit 2- function
position
, the number of units is 48, the number of actuators is 48.
3- function
position
mode = 1 3- function
position
connecting 2 actuator
For example: 48-unit 33- function
position
, the number of units is 48, the number of actuators is 96.
⑤
Unused number of units: Input the total number of yarn feeders. (Note: You can also specify the unused units
with custom functions)
⑥
Number of actuator segments: Enter the number of actuator segments
⑦
Synchronization ratio : Enter the needle cylinder-synchronizer rotation ratio. (i.e., the number of revolutions of
the synchronizer must be the integral multiple of the number of revolutions of the machine)
Method to calculate the number of pulses per stitch: 1024 (number of pulses per revolution of the synchronizer)
×sync ratio / needles
Example: Total needles (1920), synchronization ratio (20), number of pulses per stitch (recommended value is
greater than 7 and smaller than 12) = 1024 * 20 /1920;
Total needles (2640), synchronization ratio (20), number of pulses per stitch (recommended value is greater than
7 and smaller than 12) = 1024 * 26 /2640.
⑧
Needle cylinder rotating direction: Observe the direction of rotation of the needle cylinder on the machine and
input.
⑨
Synchronizer rotation direction: Observe the rotation direction of the synchronizer and input.
⑩
Actuator action setting: This function is temporarily not available, this value is in the range of 0-9999, default is
0.
⑪
Bands: Indicates jacquard arrangement and number of pattern groups, please set the appropriate band value
according to the jacquard arrangement and number of pattern groups.
4-1-2 Actuator Angle Setting
Press
【
Next page
】
, the following menu will appear on the screen, this menu is used to input the precise mounting
position of the actuator base on the machine.
(Fig. 5)
The angle value from the origin to the first actuator is 000.000.
(Note: ORG-001 must be 000.000)
All actuators must be in a 360-degree angle, if any one is not in a 360-degree angle, you cannot end the operation in
this step.
Repeat
：
This function can be used when you repeat to input the same data. When you press this key, the following
menu will appear on the screen, this function will save you time without the need to manually re-enter the same data.
Actuator angle
Next page
Previous page
Repeat/ MENU
End/ESC
