Guangdong Chuangda Automatic Equipment Co.,Ltd.
56
/
63
Add: D11, New Lighting Source Industrial Basis, Nanhai District, Foshan City, Guangdong Province
Tel: +86- 0757-82629566 82629546 82326616 Fax: +86- 0757-82622156
3. Click
【
Remove Patterns
】
, and press the confirm key, the system starts to clear the read patterns;
4. Click
【
Remove Parameters
】
, and press the confirm key, the system starts to execute the command to clear the
data;
5. At this time, it is necessary to input new system data into the system, followed by inputting preliminary
instructions, pattern data and counter setting.
6. Data removal is completed.
14-2. Touch-Screen Calibration
During shutdown, unplug the synchronizer cable, turn off the power and restart, the following menu appears, press
and hold the mid position of the screen for 3 seconds to force the screen to enter the calibration mode.
Refer to 6-5 Touch-screen calibration function for calibration procedure.
Press and hold here for 3
seconds to enter forced
calibration
Restore the default system parameters
This machine support 2-position 48-unit and 3-position 24-unit
1. Remove Patterns
2. Remove Parameters
3. System Upgrade
End/ESC
Encoder error
Encoder error
Encoder connection error!
Encoder connection error!
Repair and turn on the power again
Repair and turn on the power again
