Guangdong Chuangda Automatic Equipment Co.,Ltd.
40
/
63
Add: D11, New Lighting Source Industrial Basis, Nanhai District, Foshan City, Guangdong Province
Tel: +86- 0757-82629566 82629546 82326616 Fax: +86- 0757-82622156
7. Count Setting
Press
【
Count
】
on the screen to enter the setting menu
Count setting method includes the following:
(1) Set the number of revolutions: Set the number of revolutions in knitting from start to stop of the machine,
when the number of preset revolutions is reached, the machine stops knitting, the knitting menu on the
screen will change into count menu, reset is needed at this time.
(2) Knitting revolutions: the number of knitting revolutions recorded by the counter after
①
display starts.
(3) Cumulative number of revolutions: The total number of revolutions so far, irrelevant to whether pressing
the "Start" key.
(4) A / B / C: Displaying the number of revolutions of shit A, B and C respectively.
(Fig. 59)
(Fig. 60)
In the "Select shift" box, press
【
A
】
to select the number of shift A, you can also select
【
B
】
or
【
C
】
.
Press the hidden key at the top right corner of the screen (or the panel key "menu") , prompt box shown in the
figure below will appear, press
【
Confirm
】
key and enter the password "5211", the count number of the currently
Count Setting
Set number
Knitting number
Cumulative
number
Shift selection
Again
Cancel
Stop
End/ESC
Start
Count Setting
Set number
Knitting number
Shift selection
Cumulative
number
Again
Cancel
Start
Stop
End/ESC
