Guangdong Chuangda Automatic Equipment Co.,Ltd.
47
/
63
Add: D11, New Lighting Source Industrial Basis, Nanhai District, Foshan City, Guangdong Province
Tel: +86- 0757-82629566 82629546 82326616 Fax: +86- 0757-82622156
12. Machine Operation:
Start the knitting machine.
After confirming that the mechanical and electrical parameters of the machine are set correctly, and the knitting
patterns have been entered, start the machine by following the steps below:
Firstly know the following: There are three keys on the machine: Start (green), jog (orange) and stop (red) keys,
the priority order from high to low is stop, jog, start.
Press the
key on the panel, the corresponding icon is lit up on the display (yellowing), the inverter is
powered on, press the start key of the machine, the machine starts running.
After delaying for 5 seconds, the fan starts rotation (when the fan button is lit), the gas valve is opened to
supply gas; the oil pump starts and supplies oil with the selected operating mode. After the machine starts running,
the start and stop of the fan, cloth lighting lamps, illuminating lights or adjustment of machine speed, etc, will not
affect the normal operation of the machine.
Note: The
key is not available during operation, in order to ensure that no-load operation of the
contactor.
When the machine starts weaving, the following message appears on the display screen:
(Fig. 69)
Needles: Displaying knitting stitches
Rotation speed: Revolution per minute (RPM.)
Set speed: Set number of revolutions, the value set with the "Count"
Knitting rotation speed: Number of knitting revolutions, the current knitting value from the “Start” of “count”.
Cumulative revolutions: Cumulated knitting number
Pattern name: Pattern file name
Shift: The shift currently counted
Shift knitting number: The knitting number of the shift currently counted
Synchronizer : Displaying the code value of during operation of the synchronizer
Needles:
Speed:
Set revolutions:
Knitting revolutions:
Cumulative revolutions:
Shift:
Knitting number:
Synchronizer:
1. Pattern type
2. Check
3. Count
4. Memory function
5. Reset
6. Next page tips
Normal operation
