Chrysler PACIFICA 2018 Owner'S Manual Download Page 75

Page: 75 / 716

Easy Entry — With The Seat Folded Flat

The seats can be folded and tilted for more accessibility for
passengers to enter and exit the third row.

1. Without a child seat installed, you can fold the seat by

pulling the recliner handle on the bottom part of the
seat. Before pulling the recliner lever, make sure the arm
rests are folded up.

Pull the strap on the back of the seat and the seat will tilt
forward.

2. To put it back into position, pull back on the folded seat

and make sure that it locks into position. Then, pull the
seatback toward the back and fold down the arm rests.

Recliner Lever

Pull Strap

GETTING TO KNOW YOUR VEHICLE

Summary of Contents for PACIFICA 2018













































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PACIFICA 2018

Reviews:

Brands by name

Popular brands

Chrysler PACIFICA 2018, Owner'S Manual

Search results

Summary of Contents for PACIFICA 2018

Reviews:

Brands by name

Popular brands