Chrysler PACIFICA 2018 Owner'S Manual Download Page 292

Page: 292 / 716

Frequently Asked Questions About Installing Child Restraints With LATCH

Can the LATCH anchorages and the

seat belt be used together to attach a

rear-facing or forward-facing child

restraint?

Do not use the seat belt when you

use the LATCH anchorage system to

attach a rear-facing or forward-facing

child restraint.

Booster seats may be attached to the

LATCH anchorages if allowed by the

booster seat manufacturer. See your

booster seat owner’s manual for

more information.

Can two child restraints be attached

using a common lower LATCH an-

chorage?

Never “share” a LATCH anchorage

with two or more child restraints. If

the center position does not have

dedicated LATCH lower anchorages,

use the seat belt to install a child seat

in the center position next to a child

seat using the LATCH anchorages in

an outboard position.

Can the rear-facing child restraint

touch the back of the front passenger

seat?

Yes

The child seat may touch the back of

the front passenger seat if the child

restraint manufacturer also allows

contact. See your child restraint own-

er’s manual for more information.

290

SAFETY

Summary of Contents for PACIFICA 2018













































































































































































































































































































































































































































































































































































































































































































































Search results

Summary of Contents for PACIFICA 2018

Reviews:

Brands by name

Popular brands

Chrysler PACIFICA 2018, Owner'S Manual

Search results

Summary of Contents for PACIFICA 2018

Reviews:

Brands by name

Popular brands