Chrysler PACIFICA 2018, Owner'S Manual

Page: 308 / 716

4. Remove slack in the tether strap according to the child
restraint manufacturer’s instructions.
WARNING!
•
An incorrectly anchored tether strap could lead to
increased head motion and possible injury to the
child. Use only the anchorage position directly be-
hind the child seat to secure a child restraint top
tether strap.
(Continued)
WARNING! (Continued)
•
If your vehicle is equipped with a split rear seat,
make sure the tether strap does not slip into the
opening between the seatbacks as you remove slack
in the strap.
Third Row Tether Attachment
The tether anchorage found on the back of the 60% seat in
the third row may be used by either the left outboard or the
center seating position. Only tether one child restraint to
the tether anchorage at a time.
To connect the tether strap hook to the tether anchorage for
either seating position on the 60% third row seat:
1. Route the tether strap to provide the most direct path for
the strap between the anchor and the child seat.
2. If the car seat is in the center, raise the center head
restraint and route the tether strap around the inboard
(left) side of the head restraint support posts, as shown
in the diagram.
Rear Seat Tether Strap Attachment
(Second Row Anchorage Shown)
306 SAFETY