Chrysler 300 SRT8 2013 Owner'S Manual Download Page 458 | Manualshive

Page: 458 / 563

background image

Towing Condition

Wheels OFF the Ground

ALL MODELS

Flat Tow

NONE

IF Transmission is operable:

•

Transmission in

NEUTRAL

•

30 mph (48 km/h)

max

speed

•

15 mi (24 km)

max

distance

Wheel Lift

Front

Rear

OK

Flatbed

ALL

BEST METHOD

Proper towing or lifting equipment is required to prevent
damage to your vehicle. Use only tow bars and other
equipment designed for this purpose, following equip-
ment manufacturer’s instructions. Use of safety chains is
mandatory. Attach a tow bar or other towing device to
main structural members of the vehicle, not to bumpers
or associated brackets. State and local laws regarding
vehicles under tow must be observed.

If you must use the accessories (wipers, defrosters, etc.)
while being towed, the ignition must be in the ON/RUN
position, not the ACC position.

If the vehicle’s key fob is unavailable or the battery is
discharged, see “Shift Lever Override” in “What To Do In
Emergencies” for instructions on shifting the automatic
transmission out of PARK for towing.

456

WHAT TO DO IN EMERGENCIES

«
...
456
457
458
459
460
...
»

Summary of Contents for 300 SRT8 2013




















































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 300 SRT8 2013

Brand: RAM Commercial Pages: 12

Brand: Chevrolet Pages: 356

Brand: Ford Pages: 272

Brand: Pontiac Pages: 376

Brand: Jeep Pages: 712

Brand: Yakima Pages: 19

UCI-11C NTV-KIT331

Brand: Nav TV Pages: 4

2008 MX-5 Miata

Brand: Mazda Pages: 400

Brand: Oypla Leisure Pages: 4

Brand: Havis Pages: 5

Brand: WABCO Pages: 34

Brand: Lantronix Pages: 51

Brand: RAM Pages: 330

Brand: Suzuki Pages: 504

Brand: Chevrolet Pages: 46

Brand: MacNeil Pages: 2

Brand: Nav TV Pages: 8

iCarPlay Direct Connect 2000

Brand: Monster Pages: 66

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands