Chrysler 300 SRT8 2013 Owner'S Manual Download Page 116 | Manualshive

Page: 116 / 563

background image

The area on the rear fascia where the radar sensors are
located must remain free of snow, ice, and dirt/road
contamination so that the BSM system can function
properly. Do not block the area of the rear fascia where
the radar sensors are located with foreign objects (bum-
per stickers, bicycle racks, etc.).

The BSM system notifies the driver of objects in the
detection zones by illuminating the BSM warning light
located in the outside mirrors in addition to sounding an
audible (chime) alert and reducing the radio volume.
Refer to “Modes Of Operation” for further information.

The BSM system monitors the detection zone from three
different entry points (side, rear, front) while driving to
see if an alert is necessary. The BSM system will issue an
alert during these types of zone entries.

Entering From The Side

Vehicles that move into your adjacent lanes from either
side of the vehicle.

Sensor Location (Driver Side Shown)

114

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

«
...
114
115
116
117
118
...
»

Summary of Contents for 300 SRT8 2013




















































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 300 SRT8 2013

Brand: ZAPTEC Pages: 240

Brand: Federal Signal Corporation Pages: 13

Porsche 911 Turbo S Wheel

Brand: FANATEC Pages: 9

Brand: UltraGauge Pages: 55

Brand: Yakima Pages: 6

Brand: Yakima Pages: 18

DAF POWERCHOICE 250A

Brand: Paccar Pages: 20

Brand: AutoWatch Pages: 4

Brand: AA Products Pages: 4

MCL-7000 Series

Brand: Dakota Digital Pages: 2

Brand: Volvo Pages: 284

Brand: Chevrolet Pages: 412

Brand: Whelen Engineering Company Pages: 9

Speed & Route Profiler

Brand: Racelogic Pages: 24

Brand: TAUBENREUTHER Pages: 18

Brand: OHIOSTEEL Pages: 2

1500 CLASSIC 2020

Brand: RAM Pages: 360

Sprinter Bed System DIY

Brand: FVC Pages: 8

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands