Chrysler 300 SRT8 2013 Owner'S Manual Download Page 420 | Manualshive

Page: 420 / 563

background image

TIRE ROTATION RECOMMENDATIONS

Tires on the front and rear axles of vehicles operate at
different loads and perform different steering, driving,
and braking functions. For these reasons, they wear at
unequal rates.

These effects can be reduced by timely rotation of tires.
The benefits of rotation are especially worthwhile with
aggressive tread designs such as those on all season type
tires. Rotation will increase tread life, help to maintain
mud, snow, and wet traction levels, and contribute to a
smooth, quiet ride.

Refer to the “Maintenance Schedule” for the proper
maintenance intervals. The reasons for any rapid or
unusual wear should be corrected prior to rotation being
performed.

Tire Rotation

The suggested rotation method for vehicles equipped
with all season tires is the “forward-cross” as shown in
the following diagram.

418

STARTING AND OPERATING

«
...
418
419
420
421
422
...
»

Summary of Contents for 300 SRT8 2013




















































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 300 SRT8 2013

Brand: Taffio Pages: 8

5TH GEN 4RUNNER

Brand: Victory 4x4 Pages: 5

Brand: Keith Pages: 2

Brand: Voxoa Pages: 48

Brand: Buick Pages: 20

Brand: Camecho Pages: 2

E60-82-007-02-10

Brand: Eibach Pages: 3

ULTIMATE SPEED 296713

Brand: walser Pages: 10

Brand: Mercedes-Benz Pages: 373

ZapCharger Portable C1

Brand: ZAPTEC Pages: 20

Brand: Air Lift Pages: 28

Brand: Dolphin Pages: 16

Brand: Hummer Pages: 31

THERAPEDIC 2000

Brand: Columbia Pages: 14

Brand: Anker Technology Pages: 8

Brand: J. Strong Pages: 2

Brand: Mercedes-Benz Pages: 493

Brand: Axxess Pages: 4

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands