manualshive.com logo in svg

Chrysler 300 SRT8 2013, Owner'S Manual

The 2013 Chrysler 300 SRT8 is a powerful and luxurious vehicle that demands attention on the road. To help you make the most of your ownership experience, we offer a comprehensive and detailed Owner's Manual for free download on our website. Explore the exceptional features and capabilities of the Chrysler 300 SRT8 with our user-friendly manual, available at manualshive.com.

Share
Download
background image

1. Starting with the ignition switch in the OFF position:

2. Press the ENGINE START/STOP button once to

change the ignition switch to the ACC position (EVIC
displays “ACC”),

3. Press the ENGINE START/STOP button a second time

to change the ignition switch to the RUN position
(EVIC displays “RUN”),

4. Press the ENGINE START/STOP button a third time

to return the ignition switch to the OFF position (EVIC
displays “OFF”).

Extreme Cold Weather (Below –20°F Or −29°C)

To ensure reliable starting at these temperatures, use of
an externally powered electric engine block heater (avail-
able from your authorized dealer) is recommended.

If Engine Fails To Start

WARNING!

•

Never pour fuel or other flammable liquid into the
throttle body air inlet opening in an attempt to start
the vehicle. This could result in flash fire causing
serious personal injury.

•

Do not attempt to push or tow your vehicle to get it
started. Vehicles equipped with an automatic trans-
mission cannot be started this way. Unburned fuel
could enter the catalytic converter and once the
engine has started, ignite and damage the converter
and vehicle.

(Continued)

362

STARTING AND OPERATING

Summary of Contents for 300 SRT8 2013




















































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 300 SRT8 2013

IAME Parilla X30 Assembly Instructions And User'S Manual preview
Parilla X30
Brand: IAME Pages: 17
Jeep UNIVERSAL CJ-2A Operation Data preview
UNIVERSAL CJ-2A
Brand: Jeep Pages: 27
Jeep RENEGADE 2016 User Manual preview
RENEGADE 2016
Brand: Jeep Pages: 228
Jeep PATRIOT 2013 User Manual preview
PATRIOT 2013
Brand: Jeep Pages: 108
Jeep PATRIOT 2013 Owner'S Manual preview
PATRIOT 2013
Brand: Jeep Pages: 525
Prorack K383 Fitting Instructions Manual preview
K383
Brand: Prorack Pages: 14
Carcomm CNM-71 Quick Start Manual preview
CNM-71
Brand: Carcomm Pages: 2
Whispbar K392W Fitting Instructions For Basic Carrier preview
K392W
Brand: Whispbar Pages: 14
GMC SIERRA 2002 Manual preview
SIERRA 2002
Brand: GMC Pages: 499
Kia Amanti Owner'S Manual preview
Amanti
Brand: Kia Pages: 290
KRAFTWERK Automotive 31006 Instructions preview
Automotive 31006
Brand: KRAFTWERK Pages: 2
VDO DLD Wide Range II Installation Instructions Manual preview
DLD Wide Range II
Brand: VDO Pages: 84
Wagan TravelCharge Companion GO-Plus User Manual preview
TravelCharge Companion GO-Plus
Brand: Wagan Pages: 3
Würth 071554055 User Instructions preview
071554055
Brand: Würth Pages: 36
FALCON RIDGE HO-P500-FC04 Instructions For Installation And Care preview
HO-P500-FC04
Brand: FALCON RIDGE Pages: 8
Scosche 142HUD2 Manual preview
142HUD2
Brand: Scosche Pages: 8
MULTILIFT ULTIMA S Installation Instructions Manual preview
ULTIMA S
Brand: MULTILIFT Pages: 62
Jaeger 21360508 Fitting Instructions Manual preview
21360508
Brand: Jaeger Pages: 13

Brands by name

Popular brands

Load more brands