manualshive.com logo in svg

Chrysler 300 SRT8 2013, Owner'S Manual

The 2013 Chrysler 300 SRT8 is a powerful and luxurious vehicle that demands attention on the road. To help you make the most of your ownership experience, we offer a comprehensive and detailed Owner's Manual for free download on our website. Explore the exceptional features and capabilities of the Chrysler 300 SRT8 with our user-friendly manual, available at manualshive.com.

Share
Download
background image

NOTE:

The Headlights On with Wipers feature can be

turned on or off using the Uconnect

威

System, refer to

“Uconnect

威

Settings” in “Understanding Your Instru-

ment Panel” for further information.

Rain Sensing Wipers

This feature senses moisture on the windshield and
automatically activates the wipers for the driver. The
feature is especially useful for road splash or over spray
from the windshield washers of the vehicle ahead. Rotate
the end of the multifunction lever to one of four settings
to activate this feature.

The sensitivity of the system can be adjusted with the
multifunction lever. Wiper delay position 1 is the least
sensitive, and wiper delay position 4 is the most sensi-
tive. Setting 3 should be used for normal rain conditions.
Settings 1 and 2 can be used if the driver desires less
wiper sensitivity. Settings 4 can be used if the driver
desires more sensitivity. The rain sense wipers will

automatically change between an intermittent wipe, slow
wipe and a fast wipe depending on the amount of
moisture that is sensed on the windshield. Place the
wiper switch in the OFF position when not using the
system.

The Rain Sensing feature can be turned on and off using
the Uconnect Touch™ System, refer to “Uconnect
Touch™ Settings” in “Understanding Your Instrument
Panel” for further information.

NOTE:

•

The Rain Sensing feature will not operate when the
wiper speed is in the low or high position.

•

The Rain Sensing feature may not function properly
when ice or dried salt water is present on the
windshield.

•

Use of Rain-X

威

or products containing wax or silicone

may reduce rain sensor performance.

204

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Summary of Contents for 300 SRT8 2013




















































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 300 SRT8 2013

Jeep 2011 grand cherokee Accessories Quick Reference Manual preview
2011 grand cherokee
Brand: Jeep Pages: 22
Jeep 2013 Grand Cherokee Owner'S Manual preview
2013 Grand Cherokee
Brand: Jeep Pages: 704
Jeep 2012 Liberty Owner'S Manual preview
2012 Liberty
Brand: Jeep Pages: 558
LAS BC260 Operating Instructions Manual preview
BC260
Brand: LAS Pages: 44
LAS 11807 Operating Instructions Manual preview
11807
Brand: LAS Pages: 24
Honda HRM3000 User Manual preview
HRM3000
Brand: Honda Pages: 73
3SIXT 3S-1186 Operating Instructions Manual preview
3S-1186
Brand: 3SIXT Pages: 12
FVC Sprinter Bed System Adventure Wagon Kit Installation Manual preview
Sprinter Bed System Adventure Wagon Kit
Brand: FVC Pages: 8
Mobility Networks RPH 35.13 Use And Maintenance Manual preview
RPH 35.13
Brand: Mobility Networks Pages: 52
Saab 9000 1985 Service Manual preview
9000 1985
Brand: Saab Pages: 92
A-rival PNC70 Active Hardware Manual preview
PNC70 Active
Brand: A-rival Pages: 23
Scosche HUD580GC Manual preview
HUD580GC
Brand: Scosche Pages: 12
Summit Racing SUM-G1083 Assembly & Use Instructions preview
SUM-G1083
Brand: Summit Racing Pages: 11
Acura 08L03-TA1-200A Installation Instructions preview
08L03-TA1-200A
Brand: Acura Pages: 4
MiX Telematics FM 3617i Installation Manual preview
FM 3617i
Brand: MiX Telematics Pages: 39
Blue Ox BX2323 Installation Instructions Manual preview
BX2323
Brand: Blue Ox Pages: 9
Nav TV NTV-KIT850 Install Manual preview
NTV-KIT850
Brand: Nav TV Pages: 11
Blue Bird TC/2000 Owner'S Manual preview
TC/2000
Brand: Blue Bird Pages: 111

Brands by name

Popular brands

Load more brands