Chrysler 300 SRT8 2013 Owner'S Manual Download Page 90 | Manualshive

Page: 90 / 563

background image

Installing A Child Restraint with a Switchable
Automatic Locking Retractor (ALR)

1. Place the child seat in the center of the seating

position. For some second row seats, you may need to
recline the seat and/or raise the head restraint to get a
better fit.

2. Pull enough of the seat belt webbing from the retractor

to pass it through the belt path of the child restraint.
Do not twist the belt webbing in the belt path.

3. Slide the latch plate into the buckle until you hear a

“click.”

4. Pull on the webbing to make the lap portion tight

against the child seat.

5. To lock the seat belt, pull down on the shoulder part of

the belt until you have pulled all the seat belt webbing
out of the retractor. Then, allow the webbing to retract

back into the retractor. As the webbing retracts, you
will hear a clicking sound. This means the seat belt is
now in the Automatic Locking mode.

6. Try to pull the webbing out of the retractor. If it is

locked, you should not be able to pull out any web-
bing. If the retractor is not locked, repeat step 5.

7. Finally, pull up on any excess webbing to tighten the

lap portion around the child restraint while you push
the child restraint rearward and downward into the
vehicle seat.

8. If the child restraint has a top tether strap and the

seating position has a top tether anchorage, connect
the tether strap to the anchorage and tighten the tether
strap. Refer to “Lower Anchors and Tethers for Chil-
dren (LATCH) Restraint System” for directions to
attach a tether anchor.

88

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

«
...
88
89
90
91
92
...
»

Summary of Contents for 300 SRT8 2013




















































































































































































































































































































































































































































































































































































Reviews:

No comments

Related manuals for 300 SRT8 2013

Brand: AA Products Pages: 6

Brand: IAME Pages: 17

Brand: RaceChip Pages: 20

QuadraTop Adventure Top S

Brand: Quadratec Pages: 20

Brand: Brodit Pages: 2

Brand: Power Fist Pages: 12

Brand: EAL Pages: 7

1973 Convertible

Brand: Volkswagen Pages: 80

Brand: TATA Motors Pages: 236

Hypercharger HYC 075

Brand: Alpitronic Pages: 64

Brand: SAN HIMA Pages: 10

Brand: CrimeStopper Pages: 1

ULTIMATE SPEED 296713

Brand: walser Pages: 10

Brand: Mercedes-Benz Pages: 373

Brand: Webasto Pages: 23

Brand: Whispbar Pages: 14

Brand: Prorack Pages: 13

Brand: ACV Pages: 2

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands