Chrysler 300 SRT8 2013 Owner'S Manual Download Page 510

Page: 510 / 563

3. Pull back the trunk liner to gain access to the tail lamp

wing nuts.

4. Remove the three wing nuts from the back of the tail

lamp assembly.

5. Pull the tail lamp assembly away from the vehicle

enough to access the electrical connector.

6. Push the electrical connector locking tab to the side.

7. Disconnect the electrical connector.

8. Continue removing lamp from vehicle in order to

access the bulb(s).

9. Turn the appropriate bulb and socket assembly coun-

terclockwise to remove it from the tail lamp assembly.

10. Disconnect the bulb from the socket assembly and

install the replacement bulb.

11. Reinstall the bulb and socket assembly into the tail

lamp assembly, and then turn it clockwise.

12. Reinstall the tail lamp assembly, fasteners, electrical

connector, and trunk trim.

13. Close the trunk.

508

MAINTAINING YOUR VEHICLE

Summary of Contents for 300 SRT8 2013




















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 300 SRT8 2013

Reviews:

Related manuals for 300 SRT8 2013

Brands by name

Popular brands

Chrysler 300 SRT8 2013, Owner'S Manual

Search results

Summary of Contents for 300 SRT8 2013

Reviews:

Related manuals for 300 SRT8 2013

Brands by name

Popular brands