Chrysler 300 SRT8 2013 Owner'S Manual Download Page 82

Page: 82 / 563

What is the weight limit (child’s
weight of the child restraint) for using the
LATCH anchorage system to attach the child
restraint?

65 lbs (29.5 kg)

Use the LATCH anchorage system until

the combined weight of the child and the

child restraint is 65 lbs (29.5 kg). Use the

seat belt and tether anchor instead of the

LATCH system once the combined weight

is more than 65 lbs (29.5 kg).

Can the LATCH anchorages and the seat

belt be used together to attach a rear-

facing or forward-facing child restraint?

Do not use the seat belt when you use the

LATCH anchorage system to attach a rear-

facing or forward-facing child restraint.

Can a child seat be installed in the center

position using the inner LATCH lower an-

chorages?

N/A

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Summary of Contents for 300 SRT8 2013




















































































































































































































































































































































































































































































































































































Search results

Summary of Contents for 300 SRT8 2013

Reviews:

Chrysler 300 SRT8 2013, Owner'S Manual, Page: 82 / 563

Search results

Summary of Contents for 300 SRT8 2013

Reviews: