chromasens 3DPIXA, Manual

Page: 80 / 99

7 Camera parameters
80 / 99 CD40131 Version 1 3DPIXA
7
Camera parameters
7.1 Integration time
Function Sets the minimum integration time (µs) for the camera
Step 0.001
Notes These are the minimum integration times for the camera.
The speed can additionally be throttled by CameraLink parameters.
Camera Value CST
Lower limit
CP000470 with 7.3k 47.00 µs
CP000520 with 7.3k 33.65 µs
Upper limit CP000470 with 7.3k 12.30 ms
CP000520 with 7.3k 9.25 ms
For the minimum integration time for different camera types at different output pixel clocks,
refer to chapter 7.4.2, p. 84.
7.2 Gain and reference
7.2.1 Target white reference values
Function Video value for the desired value of the closed loop control for white
balancing
Dependency O
nly active when the “Enable White Control” option has been set into
active mode.
Notes

Refers to the white control mark. Inside this area the closed loop
control tries to adjust gain to reach the desired values.

Internal value is a 14-bit video, GUI values are 10-bit video value,
output range of the image at the CameraLink port is usually 8-bit
range
Camera Value CST
Lower limit All 0
Upper limit All 1023
– dark reference value
This parameter refers to Reference Value (1) in Fig. 9, p. 27.