![background image](http://html.mh-extra.com/html/christie/rpmsp-d120u/rpmsp-d120u_setup-manual_2604059034.webp)
Section 3: Operation
3-4
RPMX-RPMSP-D120U & RPMSP-D275U Setup Guide
020-100038-02 Rev. 1 (09/08)
Table 3.1. Auto Setup
What an “Auto Setup” Does
OPTIMIZES:
SETS TO DEFAULT:
Pixel Tracking
Contrast
Pixel Phase
Brightness
Size and Blanking
Auto Input Level (off)
Vertical Stretch
Detail
(if video source)
Position Filter
Input Levels
Luma Delay
NOTE:
You must have an unlocked channel present to use Auto Setup.
Channel
Press
Channel
to select a specific source setup (
channel
) defined and stored in
projector memory. Once you enter a 2-digit channel number (or, if there is a list
displayed, highlight it and press
), the display will automatically change and
update according to the numerous setup parameters defined for that channel.
Note that a new channel is automatically created if you adjust an image from a
new source.
NOTE:
Channel (
Channel
) key behavior
during a presentation depends on whether
or not the
Display Channel List
option is enabled in the
Menu Preferences
menu. You can choose to use a scrollable list of channels when you press
Channel
, or
you may prefer to enter the desired channel number “blind”, i.e., without on-
screen feedback. See
Menu Preferences
later in this section.
Input 1
Press
Input 1
to display from the data or video input source connected to BNCs
labeled
INPUT 1
.
Input 2
Press
Input 2
to display from the DVI source connected to
INPUT 2
.
Input 3
Press
Input 3
to display from the composite video source connected to
INPUT 3
.
Input 4
Press
Input 4
to display from the S-video source connected to
INPUT 4
.
Input 5
Press
Input 5
to display from the
INPUT 5
interface module installed in the Option 1
slot.
NOTE:
If you have the new optional
Dual SD/HD-SDI
Module
installed at
INPUT 5
you can connect two inputs – A and B. Whether you are displaying from
INPUT 5
or from another input, press
Input 5
to display the input last used. Press
Input 5
again to toggle to the other input.
Input 6
NOTE:
Not applicable.
Channel
Input 1
Input 2
Input 3
Input 4
Input 5
Input 6
Summary of Contents for RPMSP-D120U
