Christie Roadster HD14K-J, User Manual, Page: 70 / 182

3-14 J Series 2.0, 2.4, and 3.0kW User Manual
020-100707-01 Rev. 1 (10-2011)
Section 3: Operation
3.4 Channel Setup Menu
All available channels are listed in the Channel Setup menu, which describes how each channel can be
accessed and provides access for editing, copying and deleting channels.
Press
M
ENU
from the presentation level to display the Main menu. To display the Channel Setup menu, press
3, or move the highlight to the Channel Setup option and press
E
NTER
. The Channel Setup menu will appear
(see sample below).
The channel setup icons list all defined channels. The far left column lists channel numbers defined. The values
in the far right columns indicate horizontal and vertical frequencies or if there is a defined name for a channel,
it appears here. The H & V frequencies will not appear if a name has been defined for the channel; instead the
name is only seen. The H & V frequencies are inserted as, the name when the channel is first created. The
vertical frequency is displayed with the sync polarity. The remaining columns pertain to each signal type; such
as, input number, slot location, a variety of icons indicating access to each channel, and an abbreviated
description of each signal type.
NOTE:
Use
U
P
A
RROW
K
EY
and
D
OWN
A
RROW
K
EY
to see the remaining
channels not visible in the initial display of channels .
SIGNAL TYPE — The channel list or the Channel Setup menu, identifies signal types abbreviations as
defined below in Table 3.1 - Abbreviations for Signal Type . Composite Sync on the H/C input or the V input
(4-wire). These abbreviations are preceded by either an ‘i’ (interlaced signals) or ‘p’ (progressive signal).
F
IGURE
3-13 C
HANNEL
S
ETUP
M
ENU