manualshive.com logo in svg

Christie Roadster HD14K-J, User Manual, Page: 134 / 182

Share
Download
Christie Roadster HD14K-J User Manual Download Page 134

5-6

J Series 2.0, 2.4, and 3.0kW User Manual

020-100707-01  Rev. 1   (10-2011)

Section 5: Maintenance

3. REPLACE FILTER
Remove the old filter and insert the new one. 

NOTE:

 

The direction arrows on the outside edge of the filter. 

Ensure the filter is installed with the arrows pointing into the projector.

4. RE-INSTALL THE FILTER DOOR
Secure the lock screw.

5.2

Replacing the Projection Lens

IMPORTANT! 

Remove the rear lens cap from the new lens. Keep the front lens cap on the lens to protect it 

during installation.

1. Rotate the lens clamp to the OPEN position, to remove old lens. See 

Figure 5-7

.

F

IGURE 

5-7 

2. Align the new lens interface plate with the lens mount. Align the lens electrical connector with the mating 

connector on the lens mount. Fully insert the assembly straight into the lens mount opening without 
turning. Press using your hand as shown in 

Figure 5-8

. 

NOTE:

 

Ensure the lens is not inserted at an angle, 

as this can cause damage.

F

IGURE 

5-8 

Summary of Contents for Roadster HD14K-J























































































































































































Reviews:

No comments