manualshive.com logo in svg

Christie Roadster HD14K-J, User Manual, Page: 47 / 182

Share
Download
Christie Roadster HD14K-J User Manual Download Page 47

Section 2: Installation and Setup

J Series 2.0, 2.4, and 3.0kW User Manual

2-33

020-100707-01  Rev. 1   (10-2011)

F

IGURE 

2-42 E

THERNET 

N

ETWORK 

S

ETUP

SETTING THE PROJECTOR IP ADDRESS, SUBNET MASK AND GATEWAY

: See 

Section 3.8 Configuration - 

Adjusting System Parameters and Advanced Controls.

ETHERNET/COMMUNICATION SETTINGS: 

Includes settings for configuring the IP address via HDCP (factory 

default) or static.

CHANGING THE PORT#

:

 

On some Ethernet networks, firewall restrictions may require that the port number of 

the projector be changed from its default of 3002. If so, enter a new port number in the 

Ethernet Settings

 menu 

or include the new port#. 

Separating Networks

By default, communications originating from one type of serial controller—RS-232 vs. RS-422 vs. Ethernet—
stay on the corresponding network path. A “Separate” setting indicates this separation for “

Network 

Routing

.” See 

3.8.7COMMUNICATIONS - Submenu.

 If you are using an RS-422 controller, for example, it 

will communicate only with the projector to which it is connected unless you change this setting to either “RS-
232 and RS-422 Joined” or “All Joined”.

Communicating to all Ports

To relay all messages to all ports—RS-232, RS-422, and Ethernet—set the “

Network Routing

” option in the 

Communications

 menu for each projector to “All Joined”, see 

3.8.7COMMUNICATIONS - Submenu

. This 

configuration is useful if you are using a non-RS-232 controller with the RS-232 linking available between 
these projectors. For example, you may want to use both an RS-422-compatible controller and an Ethernet-
connected PC for working with a network of projectors linked via their RS-232 in/out ports.

Summary of Contents for Roadster HD14K-J























































































































































































Reviews:

No comments