manualshive.com logo in svg

Christie Roadster HD14K-J, User Manual, Page: 33 / 182

Share
Download
Christie Roadster HD14K-J User Manual Download Page 33

Section 2: Installation and Setup

J Series 2.0, 2.4, and 3.0kW User Manual

2-19

020-100707-01  Rev. 1   (10-2011)

Front Screen Installations

In front screen installations, the projector and audience are positioned in front of the screen, which can be flat 
or curved.
Flat screens offer a gain of about 1.0 with a viewing angle just less than 180

°

. This type of screen reflects 

incident light equally in all directions so the audience can see the display from various angles.
Curved screens have a gain greater than 1.0 with a viewing angle much less than 180

°

. This type of screen does 

not reflect incident light equally in all directions; instead it is concentrated in a viewing cone. The audience 
sitting within the viewing cone area will see a brighter image than those sitting just outside the area.

F

IGURE 

2-26 

F

IGURE 

2-27 

Summary of Contents for Roadster HD14K-J























































































































































































Reviews:

No comments