manualshive.com logo in svg

Christie Roadster HD14K-J, User Manual, Page: 16 / 182

Share
Download
Christie Roadster HD14K-J User Manual Download Page 16

2-2

J Series 2.0, 2.4, and 3.0kW User Manual

020-100707-01  Rev. 1  (10-2011)

Section 2: Installation and Setup

2. Align the lens interface plate with the lens mount. Align the lens electrical connector with the mating 

connector on the lens mount. Fully insert the assembly straight into the lens mount opening without 
turning. Press using your hand as shown in 

Figure 2-2

. 

NOTE:

 

When installing the lens, ensure that the 

lens is not inserted at an angle, as this can cause damage.

F

IGURE 

2-2 

3. While holding the lens flat against the lens mount, rotate the lens clamp clockwise to lock the lens 

assembly in place. See 

Figure 2-3

.

F

IGURE 

2-3 

4. Remove the front lens cap.
5. For added stability such as motion applications, fasten the security screws provided with the lens mount. 

Refer to 

Figure 2-4

.

Summary of Contents for Roadster HD14K-J























































































































































































Reviews:

No comments