manualshive.com logo in svg

Christie Roadster HD14K-J, User Manual, Page: 133 / 182

Share
Download
Christie Roadster HD14K-J User Manual Download Page 133

Section 5: Maintenance

J Series 2.0, 2.4, and 3.0kW User Manual

5-5

020-100707-01  Rev. 1  (10-2011)

8. SECURE THE INSERTION/REMOVAL LEVER
Secure the insertion/removal lever by threading the know into the threaded block by hand or using a Phillips 
screwdriver. See Figure 

Figure 5-5

. 

F

IGURE 

5-5 

9. CLOSE THE LAMP DOOR
Using a Phillips screwdriver, secure the lamp door. 

Filter Replacement Procedure 

 Only use Christie approved filters. See Table 5.1.

The filter located at the front side of the projector and should be replaced whenever the lamp is replaced. If you 

are working in an extremely dusty environment you may want to replace the filter sooner. If this filter is not 
replaced, airflow may become restricted and cause the projector to overheat.Use the filter provided in the 
Christie approved Lamp and Filter Kit for your specific projector model. See Table 5.1.

1. TURN OFF THE PROJECTOR, COOL AND UNPLUG
Before removing or installing a filter, turn off the projector and allow it to cool for 5 minutes before 
unplugging.
2. REMOVE FILTER DOOR
Loosen the lock screw at the bottom of the filter door. Lift the door away from the projector. See 

Figure 5-6

.

F

IGURE 

5-6 

Summary of Contents for Roadster HD14K-J























































































































































































Reviews:

No comments