Christie Roadster HD14K-J, User Manual, Page: 23 / 182

Section 2: Installation and Setup
J Series 2.0, 2.4, and 3.0kW User Manual 2-9
020-100707-01 Rev. 1 (10-2011)
Cooling and Air Vents
Adequate airflow through the projector will prevent it from overheating. Keep all projector vents unobstructed
and ensure adequate airflow around the projector. See
Figure 2-11 .
F
IGURE
2-11
Lamp Door
The lamp door is located at the rear of the projector, to provide easy access to the lamp module for
replacement. Refer to
Section 5.1.1 Lamp and Filter Replacement . The lamp door is fitted with a safety
interlock which switches the lamp off when the door is opened.
Front & Rear IR Sensors
The two IR sensors located on the projector receive transmissions from the IR remote from up to 100 feet
away. It is important to keep the transmission path to these sensors unobstructed for uninterrupted
communications with the projector. The rear IR sensor is located at the back of the projector between the status
LEDs and the front IR sensor is located next to the projector front nameplate.
Projection Lenses, Lens Mount and Other Features
The projector includes a motorized lens mount that allows automated lens control and adjustment: vertical and
horizontal offsets, zoom, and focus. The lens mount can be fitted with any one of the available optional lenses
– see
Section 7 Specifications .
Allow at least 1 meter or more of
space between the projector and a
wall or other structure and place it
on a platform that does not extend
past the exhaust vents.